4 Products
Heavy Duty Gloves
Length on the Pro-Val heavy duty gloves is 240mm on the Blax HD, 300mm on the Trojan, 330mm on the Nitrile 33's and 460mm on the Nitrile 46's, which comes up to the elbow. The two reusable nitriles get thicker as they get longer, 0.38mm on the 33's and 0.55mm on the 46's, and both are washable. A carton of the 33's holds 144 pairs, against 12 pairs in a pack of the 46's. Only the Blax HD is disposable, a 0.20mm black nitrile glove sold 500 to a carton.
The Trojan is blue PVC, double dipped over a seamless cotton liner with a rough pebble finish for wet and dry grip, and chemical clean-up, spray painting and mining are among the 15 uses on its datasheet. Its EN 374 testing stops at the air and water leak tests, though, with no permeation figure for any chemical. The Nitrile 33's is cotton flock lined and carries an EN 374 level for each of the four chemicals it was tested against: 6 for n-heptane and 40% sodium hydroxide, 3 for 96% sulphuric acid and 2 for methanol. The Nitrile 46's goes further, with a permeation breakthrough time in minutes as well as a level for each chemical: acetone at 0 minutes and MEK at 15, while white spirit and 50% sulphuric acid are both over 480 minutes. The Trojan, 33's and 46's also carry EN 388:2003 mechanical levels on their datasheets, abrasion 3 on the Trojan and 4 on the two nitriles. The 33's and 46's datasheets leave it to the user to verify that a glove suits the application.